Now Shipping for only $125 by FedEx Ground in the (Contiguous U.S. Only)
VIENTO AERO FRONT LIP SPOILER
Our NEW front Viento Aero Lip Spoiler is a front end air diffuser and front spoiler combined. It cuts through the wind by directing it under the Model 3 via the 2 front air inlets. This combined with our rear diffuser creates more down force on your Model 3 making it more stable at higher speeds. The Viento Aero Lip is sold carbon fiber and it wraps all the way around the front end and ends at the wheel well opening.
Once installed the front end ground clearance will be 1.5" lower than your stock bumper. Caution will be needed when parking close up to taller parking blocks, but the 1.5" will not affect your normal parking. More below under Ground Clearance.
- $ 599 without shipping with Free Installation at RPM TESLA in RSM, CA
- $ 724 with Fedex Shipping in Contiguous USA.
Once you place this items in your shopping cart these prices will be show.
For Outside the Contiguous USA & International Shipping Please email us your address before you order so we can quote you on the additional shipping cost.
This front lip installs directly on the lower end front bumper and requires no drilling and no screwing. Professional installation may be required as this is held on with 3M VHB double sided tape and also with a liquid adhesive. We ship these with 2 strands of tape, but a bead of silicone rubber RTV will needed to be applied between the 2 tape strands to increase the bond. This lip does not install under the painted surface but goes directly on top of the painted lower area of your front bumper.
If you have clear bra, PPF installed, it will install right over it. If you have any ceramic coatings on your front end, you will need to use a magic eraser sponge to remove the coating in order to insure a strong bond the the 3M double sided tape. The spoiler will most likely crack if you want to remove it one day, but your paint will not be damaged if removed properly.
All of our Carbon Fiber Spoilers are made from Genuine Molded Carbon Fiber which is woven carbon fiber without fillers. They are UV and coated Ceramic Pro 9H coated which helps prevent yellowing or fading.
Finish Choices: The glossy version is rich and very striking, it has a wet look which features a deep 3D lustrous appearance. Matte is flat, is dry looking, and does not have the same deep 3D look.
Ground Clearance: The front end ground clearance is only 1-1/2" lower than your stock bumper. If you have lowering springs or coilovers this will not scratch on curbs or speed bumps. Caution is needed when parking close up to taller parking blocks, but this 1/2" will not affect your normal parking or driving.
Most of our products, come with a lifetime warranty. Cheap imports found on Ebay or Amazon only have a 30 day warranty, and after that you have nobody to turn to. Buy American, and buy from a company that stands behind their products! Buy from RPM TESLA.
The pricing is $599 when installed at RPM TESLA. FedEx ground shipping it is $125 more in the Contiguous U.S.. For Hawaii, Alaska, Canada, or anywhere else in the world, just email us with your address so we can get you a quote. The shipping box is 6 feet tall and very expensive to ship internationally .
The price listed at the top with the pull down menu are before the 20% off discount that is automatically discounted once placed in your shopping cart..
If you are local you can pick it up for free and we will install it at NO CHARGE. Once installed this items is not exchangeable or returnable as removal will cause damage to the front lip.
WARRANTY: Our spoilers are hand made and laid in molds by hand. The mating patterns on the ends may not match up perfectly from top to bottom, but this is not defective, and it is inherent of the molding process. Spoilers like vinyl decals become USED as soon as the double sided adhesive strip is removed. Used items are not returnable so please be sure you're happy with the spoiler and place it on your TESLA before removing the red adhesive strip. Please look it from many angles and make sure you love it and that you are comfortable with the installation process before you remove the tape strip cover. Watch our install video please !!
UV WARRANTY: Our spoilers are coated with 3 coats of UV Protection. Over time without proper care from waxing or applying a nano ceramic coating this protection can be worn off. The warranty is limited for only 1 year, and slight yellowing is normal for carbon fiber when parked outside in direct sunlight for extensive time. To extend the life of your spoiler, we recommend using a detail spray that enhances the UV protection. Also Ceramic coatings will assist with UV protection, and we recommend Ceramic Pro. Lastly, after you install it we recommend wrapping it in clear bra paint protection film. This will work on glossy ones only, and will prevent pitting and scratching and denting over time.