FITS ALL WHEELS UP TO 24 INCHES
Rim Savers Only $89 with 20% discount
TESLA Model Compatibility:
Model 3 : Works on all Wheels 18", 19" & 20"
Model S: Works on all Wheels 19" 20" & 21"
Model X: Works on all Wheels 20" & 22"
Model Y: Works on 19" Gemini's with removed hub caps.
Does Not always work on 20" Induction Wheels
Does Not always work on 21"Überturbine Wheels
For the Model Y - 20 and 21" wheels they do not always work because of recessed lip areas on the air inlets. You normally need a consistent smooth surface around the entire perimeter of the wheels for it to hold. Many people have installed them on these wheels, and they work, but others have had bonding issues and for this reason we they do not always work.
Protect your wheels from curb rash damage by installing RimSavers on your wheels. They provide a barrier between the wheel rim and the curb. They simply stick to the wheel with a high bond tape for easy DIY installation, with no removal of the tire required. RimSavers have a guide lip on the top side of the strip that provides extra protection and makes fitting very easy.
The included clips add strength and cover the seam so the cut doesn’t have to be perfect. RimSavers are lightweight and durable.
Choose from 4 colors: Red, Silver, Black or Dark Gray. Yellow is available by request, please email us for ordering @ email@example.com
WARRANTY: Here is the warranty link from RIMBLADES.
NOTE: RimSavers are for wheels with a flat lip/edge. If you have wheels with raised or lowered sections, RimSavers can’t be applied.
Looking for help installing your new RIMSavers.
There are a couple important things you need to know:
- Wash the wheels with dish soap and water. If you have previously used any kind of tire shine you will need to clean the bonding surface with a shop towel and alcohol prior to using kit. USE LOTS OF ALCOHOL or they may come off. This is not warranted without using alcohol cleaning. After installing them please do use any tire shine or chemicals for 7 days minimum.
- Dry the wheels with a shop towel. Pay close attention to the area between the tire bead and the wheel lip. This area may be saturated with tire shine, which must be removed for proper bonding.
- Use the provided alcohol wipes to clean the wheel lip. Concentrate on the face of the lip where the tape will bond, as well as the area between the bead of the tire and the rim.
- Use a dry paper towel to ensure that the wheel surface is clean of all tire shine, wax, and dirt. Wipe the inner and outer portion of the wheel lip, checking for black residue on your paper towel. If you find black residue, additional wheel cleaning is required. A shop towel and rubbing alcohol are recommended for any additional cleaning needed.