2021+ | Model S Front Lip Spoiler (3 Piece Design) - Variety*

UV Warranty: Our hydro carbon fiber coated and painted products are coated with a UV protection layer. However, this layer can be worn off if left in direct sunlight or from car washes and other forms of abrasion.

The warranty for this form of wear and tear is 6 months. Over time the paint may fade or lose its shine. To extend the life of these products, we recommend using "303 Protectant”. This will enhance the UV protection. Ceramic coatings also assist with UV protection. We recommend Ceramic Pro and 3M Ceramic.

Speed Limit Warranty: Our front lips have been tested at all speeds up to 130MPH. It is not recommended to go above speeds greater than 80MPH. In the case that your front lip falls off, please message our customer service team for possible solutions & fixes.

NOTE: These are considered USED as soon as the double sided adhesive liner is removed. Used items are NOT RETURNABLE so please be sure you're happy with the way it looks and place it on your TESLA before removing the adhesive liner.

Seam Line Note: This ABS Mold is made up of multiple seams. Seam lines on the underside of the product are normal to be visible on the upper side of each of the 3 pieces. Please check our product photos on the white background before purchasing. These lines are normal and are not covered under our warranty. If you are not satisfied with the product, please contact a customer service rep and they will proved you with an RMA and over a full refund.

These Front Lip Spoilers fit great and install in about 15 minutes. We include screws, washers, 3M tape, and Adhesive Promoter. All you need is a screwdriver or screw gun. First use the small screws to connect the 3 included pieces. To attach under the bumper you simply apply the tape as instructed in our installation video. Afterwards, screw in the larger additional self tapping screws into the black underside of the front end, thus they do not screw into your painted bumper. Next, use painters tape to apply pressure to the spoiler for at least 72 hours to create the strongest bond.

Installation Cost: $50/ 1 hour of Labor

Our installation videos provide the necessary information to correctly install our products. Therefore, we strongly recommend that you watch the installation video/s both before ordering and before installing our products.