2017+ | Model 3 Viento Side Skirts Open Back (Hollow Version) - Real Molded Carbon Fiber
2017+ | Model 3 Viento Side Skirts Open Back (Hollow Version) - Real Molded Carbon Fiber
2017+ | Model 3 Viento Side Skirts Open Back (Hollow Version) - Real Molded Carbon Fiber
2017+ | Model 3 Viento Side Skirts Open Back (Hollow Version) - Real Molded Carbon Fiber
2017+ | Model 3 Viento Side Skirts Open Back (Hollow Version) - Real Molded Carbon Fiber
2017+ | Model 3 Viento Side Skirts Open Back (Hollow Version) - Real Molded Carbon Fiber
2017+ | Model 3 Viento Side Skirts Open Back (Hollow Version) - Real Molded Carbon Fiber
2017+ | Model 3 Viento Side Skirts Open Back (Hollow Version) - Real Molded Carbon Fiber
2017+ | Model 3 Viento Side Skirts Open Back (Hollow Version) - Real Molded Carbon Fiber
2017+ | Model 3 Viento Side Skirts Open Back (Hollow Version) - Real Molded Carbon Fiber
2017+ | Model 3 Viento Side Skirts Open Back (Hollow Version) - Real Molded Carbon Fiber
2017+ | Model 3 Viento Side Skirts Open Back (Hollow Version) - Real Molded Carbon Fiber
2017+ | Model 3 Viento Side Skirts Open Back (Hollow Version) - Real Molded Carbon Fiber
2017+ | Model 3 Viento Side Skirts Open Back (Hollow Version) - Real Molded Carbon Fiber
2017+ | Model 3 Viento Side Skirts Open Back (Hollow Version) - Real Molded Carbon Fiber
2017+ | Model 3 Viento Side Skirts Open Back (Hollow Version) - Real Molded Carbon Fiber
2017+ | Model 3 Viento Side Skirts Open Back (Hollow Version) - Real Molded Carbon Fiber
2017+ | Model 3 Viento Side Skirts Open Back (Hollow Version) - Real Molded Carbon Fiber
2017+ | Model 3 Viento Side Skirts Open Back (Hollow Version) - Real Molded Carbon Fiber
2017+ | Model 3 Viento Side Skirts Open Back (Hollow Version) - Real Molded Carbon Fiber

2017+ | Model 3 Viento Side Skirts Open Back (Hollow Version) - Real Molded Carbon Fiber

$748.75 Sale Save
$524 with 30% on orders over $50

Choose Your Finish Glossy (Wet Look)


Item is in stock Only 0 left in stock Item is out of stock Item is unavailable

Adding to Cart Added to Cart

Fits:

  • 2017-2023 Model 3s
  • 2024+ Model 3 Highlands

These Model 3 Side Skirts made from 100% Molded Carbon Fiber.  Featuring a more aggressive look and they mount on the plastic on the side, not on the pained rocker panels.  These attach with 3M double side tape and self tapping screws or rivets.  

Offered in Matte & Glossy Finish, the Side Skirts have a horizontal fin and a vertical rear fin match the corners on the front and rear diffusers. They also do not extend lower than the stock rocker panels so there is no clearance issues as the sides are not lowered.

Our side skirts for the Model 3 improves the curb appeal of your Model 3 while increasing downforce and handling. 

Finish Choices:  We currently only offer this in glossy or matte finish.

Ground Clearance:  The sides of your Model 3's ground clearance are not lowered once these side skirts are installed,  so if you have lowering springs or coil-overs there is nothing to worry about.  

Installation Video:  Our demo and installation video is below.  Please watch this before ordering.  You will see in the video you will be able to test fit these before removing the double side tape red liner, and the video explains how to mount these with the adhesive promoter and a guide tape line.  The carbon side skirts are flexible and they bend slightly to fit fully flush.

 

Does not fit 2024+ Model 3 Highland!

Carbon Pattern Warranty: Real Molded Carbon Fiber is hand laid and is not Prepreg Wet Molded, so it may show imperfections in pattern direction. These variations are normal and are not a manufacturer's defect. Please refer to our Return Policy if you would like to return them.

UV Warranty: Our Real Molded Carbon Fiber is coated with 3 coats of UV Protection. Over time without proper care from waxing or applying a nano-ceramic coating, this protection can wear off. The warranty is limited to 1 year. Slight yellowing is normal for carbon fiber when parked outside in direct sunlight and is not covered under our warranty. To extend the life of our Carbon Fiber, we recommend using "303 Protectant”. Ceramic coatings will assist with UV protection and we recommend Ceramic Pro. Lastly, after you install it we recommend wrapping it in clear bra paint protection film. This will only work on the glossy finish, and will prevent pitting, scratching and denting over time.

NOTE: These are considered USED as soon as the double sided adhesive liner is removed. Used items are NOT RETURNABLE so please be sure you're happy with the way it looks and place it on your TESLA before removing the adhesive liner.

No screws, no drilling, only double sided tape is used to install this front lip. Simply clean the lower front bumper, then spray on the soapy water solution that we supply, and slide the front lip on. It dries and holds.

Our installation videos provide the necessary information to correctly install our products. Therefore, we strongly recommend that you watch the installation video/s both before ordering and before installing our products.

Shipping information: Large

If you are in Southern California, and want to pickup your order, we are located at 23201 Antonio Parkway, Rancho Santa Margarita CA 92688, please select "Pickup" at checkout.

Variable Shipping Cost Note: When purchasing multiple oversize products, shipping cost will be calculated for each oversized product individually.

NOTE* To see if your order qualifies for lower cost shipping method, please email us with your shipping address prior to purchasing.

INTERNATIONAL ORDERS: International Customers are responsible for all import fees, duties, VAT, GST, TAX, handling fees, and all other import costs in their country. The shipping fees RPM collects only covers shipping & handling.

Australia

$250

Canada

$200

California

$100

USA - Contiguous

$100

USA - Non Contiguous

$250

Rest of World

$250