2017-2023 | Model 3 Viento Aero Rear Diffuser - Real Molded Carbon Fiber
2017-2023 | Model 3 Viento Aero Rear Diffuser - Real Molded Carbon Fiber
2017-2023 | Model 3 Viento Aero Rear Diffuser - Real Molded Carbon Fiber
2017-2023 | Model 3 Viento Aero Rear Diffuser - Real Molded Carbon Fiber
2017-2023 | Model 3 Viento Aero Rear Diffuser - Real Molded Carbon Fiber
2017-2023 | Model 3 Viento Aero Rear Diffuser - Real Molded Carbon Fiber
2017-2023 | Model 3 Viento Aero Rear Diffuser - Real Molded Carbon Fiber
2017-2023 | Model 3 Viento Aero Rear Diffuser - Real Molded Carbon Fiber
2017-2023 | Model 3 Viento Aero Rear Diffuser - Real Molded Carbon Fiber
2017-2023 | Model 3 Viento Aero Rear Diffuser - Real Molded Carbon Fiber
2017-2023 | Model 3 Viento Aero Rear Diffuser - Real Molded Carbon Fiber
2017-2023 | Model 3 Viento Aero Rear Diffuser - Real Molded Carbon Fiber

2017-2023 | Model 3 Viento Aero Rear Diffuser - Real Molded Carbon Fiber

$998.75 Sale • Save
$699 with 30% 30% OFF 4th of July Sale

Finish Glossy (Wet Look)


Item is in stock Only 0 left in stock Item is out of stock Item is unavailable

Adding to Cart Added to Cart
Installation difficulty: Hard 3/5

 NOTE: Prep time may take a few business days depending how many open orders there are. Please email or live chat our customer service team and they can give you an ETA on when your order will ship

Our Viento Rear diffuser adds a more profound and aggressive look to your model 3's rear end. It increases rear downforce by making it more stable at higher speeds. The Viento Rear diffuser is solid Carbon fiber and it fits firmly in place on your lower rear bumper. If you prefer something with a less aggressive look, consider our Razzo Carbon Fiber Diffuser.

If you have clear bra, Paint Protection Film (PPF), installed, the diffuser will install right over it.  If you have any ceramic coating on your front end, you will need to use a magic eraser sponge to remove the coating to ensure a strong bond with the 3M double sided tape.

Ground Clearance:  The rear end ground clearance is slightly lowered.  If you use caution when driving near curbs, speed bumps or driveways, lowering springs or coil overs will not cause your diffuser to get scratched 

Note:  After you install it we recommend wrapping it in clear bra paint protection film.  This will work on glossy versions only, and will prevent pitting, scratching and denting over time. 

 

DEMO & INSTALLATION:

Carbon Pattern Warranty: Real Molded Carbon Fiber is hand laid and is not Prepreg Wet Molded, so it may show imperfections in pattern direction. These variations are normal and are not a manufacturer's defect. Please refer to our Return Policy if you would like to return them.

UV Warranty: Our Real Molded Carbon Fiber is coated with 3 coats of UV Protection. Over time without proper care from waxing or applying a nano-ceramic coating, this protection can wear off. The warranty is limited to 1 year. Slight yellowing is normal for carbon fiber when parked outside in direct sunlight and is not covered under our warranty. To extend the life of our Carbon Fiber, we recommend using "303 Protectant”. Ceramic coatings will assist with UV protection and we recommend Ceramic Pro.

NOTE: These are considered USED as soon as the double sided adhesive liner is removed. Used items are NOT RETURNABLE so please be sure you're happy with the way it looks and place it on your TESLA before removing the adhesive liner.

This installs directly on the lower section of your rear bumper. Professional installation may be required as this is held on with 3M VHB double sided tape and liquid adhesive. We ship these with 2 strands of tape, but a bead of silicone rubber RTV will be needed to apply on the top rounded edges.

Our installation videos provide the necessary information to correctly install our products. Therefore, we strongly recommend that you watch the installation video/s both before ordering and before installing our products.

Shipping information: XL

If you are in Southern California, and want to pickup your order, we are located at 23201 Antonio Parkway, Rancho Santa Margarita CA 92688, please select "Pickup" at checkout.

Variable Shipping Cost Note: When purchasing multiple oversize products, shipping cost will be calculated for each oversized product individually.

NOTE* To see if your order qualifies for lower cost shipping method, please email us with your shipping address prior to purchasing.

INTERNATIONAL ORDERS: International Customers are responsible for all import fees, duties, VAT, GST, TAX, handling fees, and all other import costs in their country. The shipping fees RPM collects only covers shipping & handling.

Australia

$1000 (Contact Us)

Canada

$350

California

$175

USA - Contiguous

$199

USA - Non Contiguous

$500 (Contact Us)

Rest of World

$1000 (Contact Us)

You might also like