Model 3 & Y Backseat Vent Overlay - Real Forged Carbon Fiber
Model 3 & Y Backseat Vent Overlay - Real Forged Carbon Fiber
Model 3 & Y Backseat Vent Overlay - Real Forged Carbon Fiber
Model 3 & Y Backseat Vent Overlay - Real Forged Carbon Fiber
Model 3 & Y Backseat Vent Overlay - Real Forged Carbon Fiber
Model 3 & Y Backseat Vent Overlay - Real Forged Carbon Fiber
Model 3 & Y Backseat Vent Overlay - Real Forged Carbon Fiber
Model 3 & Y Backseat Vent Overlay - Real Forged Carbon Fiber
Model 3 & Y Backseat Vent Overlay - Real Forged Carbon Fiber
Model 3 & Y Backseat Vent Overlay - Real Forged Carbon Fiber

Model 3 & Y Backseat Vent Overlay - Real Forged Carbon Fiber

$186.20 Sale • Save
$140 - 25% off with Cinco De Mayo Sale 25%

Finish Glossy (Wet Look)

Item is in stock Only 0 left in stock Item is out of stock Item is unavailable

Adding to Cart Added to Cart
Installation difficulty: Easy 1/5

Forged Carbon Fiber Composite is a material composed of small pieces of carbon fiber that are pressed into shape as the resin cures.  The material is one-third as dense as metal titanium but stronger, and consists of chopped carbon fiber tows that are sandwiched between two layers of filmed resin. 

If you love the look of forged carbon fiber, we recommend the Center Console Overlay.  This will look great with this Backseat Vent Overlay.


 INSTALLATION:

UV Warranty: Our Real Forged Carbon Fiber is coated with 3 coats of UV Protection. Over time without proper care from waxing or applying a nano-ceramic coating, this protection can wear off. The warranty is limited to 1 year. Slight yellowing is normal for carbon fiber when parked outside in direct sunlight and is not covered under our warranty. To extend the life of our Carbon Fiber, we recommend using "303 Protectant”. Ceramic coatings will assist with UV protection and we recommend Ceramic Pro.

NOTE: These are considered USED as soon as the double sided adhesive liner is removed. Used items are NOT RETURNABLE so please be sure you're happy with the way it looks and place it on your TESLA before removing the adhesive liner.

Clean the contact area where the 3M double-sided tape is applied with rubbing alcohol. Then, peel off the adhesive liner and apply pressure in the correct location suggested in the installation video. After it is installed, we suggest using painters tape to exert more pressure on the double sided tape. 3M says 72 hours is needed for it to fully bond, so please keep this applied pressure during these 3 days.

Our installation videos provide the necessary information to correctly install our products. Therefore, we strongly recommend that you watch the installation video/s both before ordering and before installing our products.

You might also like